Wiki¶
Adaptative Cat-flap, designed with Freecad, no-part-design method, with Spreadsheet
You also need 1,5 mm diameter steel rod, length depend the size you choose in the CAD.
Version 1.1¶
version updates:- No bearing, it's useless
- chamfer in the opening to avoid friction between the PMMA door and the door frame especially when cold restreint PLA frame
| File | type | Comments |
|---|---|---|
| CatFlap_1.1.FCStd | Freecad File | If you need to modify dimensions |
| Porte_inter_chanfreinée_STL_1.stl | 3D mesh file | Print with PLA |
| Porte_exter_chanfreinée_STL_1.stl | 3D mesh file | Print with PLA |
| TPU exter_STL_1.stl | 3D mesh file | Print with TPU |
| TPU inter_STL_1.stl | 3D mesh file | Print with TPU |
| porte-plexi-3mm.dxf | vector file | Cut with laser |
| Axe-Porte-Vitrée_STL_1.stl | vector file | Axis PLA print |
Version 1¶
| File | type | Comments |
|---|---|---|
| Chatière-pgp.FCStd | Freecad File | If you need to modify dimensions |
| PgpCatFlap-Indor.stl | mesh file | Print with PLA |
| PgpCatFlap-Outdor.stl | mesh file | Print with PLA |
| PgpCatFlap-Door-handler.stl | 3D mesh file | Print with PLA or TPU |
| porte-plexi-3mm.dxf | vector file | Cut with laser |